Pages

Thursday, May 23, 2013

Sunglasses Case Tutorial

sunglasses case tutorial (2.1)

After observing a few ideas for making sunglasses cases on others' blogs the past few weeks, I decided to design my own. I knew I wanted it to snap closed at the top. Also, I wanted to use supplies and scraps of fabric I had on hand.


sunglasses case tutorial (4)

To make this sunglasses case, you will need:
- two 5” x 9” pieces of exterior fabric (I’ll show you how I added the ric rac in the next step.) 
- two 5” x 9” pieces of fabric for the interior
- four 5” x 9” pieces of felt (for the interfacing)
- two 2 1/2” x 4 1/2” pieces for the closure
- one snap (four pieces)
I made my exterior pieces 5” x 9” by sewing together one yellow piece 5” x 7 1/2” and a chevron scrap that was 5” wide and longer than I needed. I trimmed it to fit after adding the ric rac.
To add ric rac, you’ll need two 5” pieces.

snappy sunglasses case tutorial (2)

Stitch the ric rac to one of the pieces of fabric.
snappy sunglasses case tutorial (3)

Then sandwich the ric rac between the two pieces with right sides together. Stitch the pieces together below the line of stitching you made in the prior step.
snappy sunglasses case tutorial (4)

Open, press the ric rac toward the desired side.
snappy sunglasses case tutorial (5)

Topstitch on the opposite side.
snappy sunglasses case tutorial (6)

Repeat for the other exterior piece. 

Trim to fit, if necessary. Stitch the felt to the exterior fabric using a long basting stitch. Repeat for other exterior piece. *See note below on adding one side of the snap at this step.
snappy sunglasses case tutorial (7)

Use a round object to shape the bottom sides of the case and make them round.
snappy sunglasses case tutorial (11)

Shape both sides and trim.
snappy sunglasses case tutorial (12)

To make the closure piece, place the 2 1/2” x 4 1/2” pieces right sides together and stitch around them. Leave an opening for turning.
snappy sunglasses case tutorial (8)

Turn, press and topstitch around the whole piece.
snappy sunglasses case tutorial (9)

Baste it with right sides together to the back exterior piece as shown below.
snappy sunglasses case tutorial (10)

Now stitch the exterior fabric pieces together with right sides together, using a 1/2” seam allowance.
Next, baste the felt to the interior pieces of fabric. Using the exterior pieces as a pattern, round the bottom of the interior fabric pieces.
  snappy sunglasses case tutorial (13)

Stitch the interior fabric right sides together but leave an opening for turning.
snappy sunglasses case tutorial (14)

Pin the exterior layers to the interior layers with right sides together. Stitch around the rim of the case with a 1/2” seam allowance.

snappy sunglasses case tutorial (15)

Turn the whole thing through the opening you left in the bottom of the lining. Press it flat. Press the opening in the lining closed and then stitch it closed.

snappy sunglasses case tutorial (16)

Turn the lining down inside the case. Press again.
snappy sunglasses case tutorial (17)

Apply the snap. I hammered my snaps into place.

*In hindsight, it would be a lot easier to add the the snap to the exterior fabric and felt layers only, not through all four layers of felt and fabric.
snappy sunglasses case tutorial (31)

These would make very fun gifts to give to friends. Or you can just enjoy carrying your own sunglasses in style all summer long.

sunglasses case tutorial (2)

This case matches one of the chevron bags I recently made. It’s going to be part of a gift for a friend!

snappy sunglasses case tutorial (1)

Places I have linked:
Or So She SaysTrain to CrazyTater tots & Jello Merry Messy Life, Sugar Bee CraftsReasons to Skip the Housework,  The 36th Avenue, House of HepworthsSomeday CraftsSouthern Lovely504 Main,Serenity Now,  Fingerprints on the FridgeI heart NapTime, Classy ClutterA Glimpse Inside, Somewhat SimpleGingerly MadeSerenity NowToday's Creative BlogThe Winthrop ChroniclesHome Stories A to ZCraftyScrappyHappy

4 comments:

  1. Great tutorial, love the use of the rif raf too! I was having trouble doing rounded corners on a purse the other day (http://clarewillcocks.blogspot.com/2013/05/a-little-sewing-project.html) but this has really helped me for next time, thanks!

    ReplyDelete
  2. Very cute! And I always love a project that I can make with my piles of fabric scraps. Thanks for linking up at Project Inspire{d}!

    ReplyDelete
  3. Cute! I need to make several of these for my 'readers' too! Stopping by from We Did It Wednesday...Sew Much Ado!

    ReplyDelete
  4. Great tutorial! I'm in need of a sunglasses case. Thanks for the inspiration! I’d love for you to check out our Pattern Party! Those with free patterns and templates to share are invited to link up! Starts on the 1st of each month.

    ReplyDelete

Spelling or grammar will not be criticized, so there's no reason not to leave me a comment!